Strobo led / flashing orange leds 4x 2 watt 12 & 24 Volt

Dietro-light flashing led; works on 12 V or 24 V DC; so usable on both car, forklift, truck, tractor etc.

The LED spotlight is equipped with ultra bright LEDs.

Technical data:

*Power : 8 W ( 4 leds of 2 Watts)

*Power consumption: 1A at 12 Volts; 0.5A at 24 Volts

*Orange colour

* 16 different flash programs easily programmable (see below).

*Possibility to synchronize more strobo led / flashing leds with each other!

*Dimensions (incl brackets) in mm: L x W x H = 120 x 40 x 36

* Splash proof, supplied with free 90° mounting bracket!

*Operating temperature between -40°C to max +60°C

Connections:

Red = +

Black = ground -

Yellow = every time you tap the yellow wire against ground, the flash programme changes. Once you have made your choice, the strobo LED remembers this for life, even if it is completely without power. There are 16 flash programs. After programming, isolate the yellow wire.

White= you set several strobe leds on the same program (very important!) . Then connect the white wires with each other. The strobo leds will now always work in sync. You must not use the white wire, you may.

Do not connect it to canbus controlled lights!

To ensure the watertightness of this strobo LED, a small amount of TEC 7 or other sealant should be applied to the place where the wiring enters the strobo LED before final assembly.