All engine seals for 240D OM 616 and 300D OM 617

All engine seals in a 240 Diesel OM 616 and a 300 Diesel OM 617, and the turbo version. Both for the G class and the W123.

617 016 01 80 : valve cover seal 300 D and Turbo

615 016 00 80 valve cover seal 240 D ; 615 is not a error !

 

616 203 02 80 thermostat housing on engine block

616 201 00 80 seal between water pump and aluminium casing 

616 203 01 80 seal between water pump -aluminium casing and engine block

617 203 01 80 thermostat seal 

616 011 03 80 seal between vacuum pump and engine block

616 074 00 80 seal between fuel pump and engine block

 

616 184 07 80 seal between oil filter housing and engine block

616 184 13 80 between oil filter housing and rear plate for oil contact or oil pressure gauge

011 997 22 47 crankshaft seal at the front

000 977 69 41 rear crankshaft seal 

616 014 01 22 seal small oil pan 240D and 300D NOT FOR G CLASS !!!

617 014 01 80 seal small oil pan TURBO ONLY

xxx xxx xx xx xx seal large aluminium sump pan to engine block, as far as I know, does not exist. 

 

617 017 02 60 fire plate injectors 

615 142 07 80 in/outlet collector seal 240 D ; 615 is not a writing error !

617 142 07 80 in/outlet collector seal 300 D and Turbo

617 052 02 80 chain tensioner seal 

617 050 01 67 valve stem rubbers 240 D and 300 D

617 050 00 67 valve stem rubbers 300D Turbo

616 016 20 20 cylinder head gasket 240 D

617 016 80 20 cylinder head gasket 300 D and Turbo

 

For the W 123 enthusiasts :

For level control ( SLS )on the W123 break/ station wagon this is standard, on a coupe and 4 door as an option.

114 236 00 80 paper seal between pump and cylinder head all engine versions 

010 997 43 45 Large O-ring seal 

004 997 01 47 small O- ring. The leakage/failure/wear of this seal causes engine oil to mix with the level control oil. Few technicians know this !!!

 

I do not take any responsibility herein regarding correct information or numbers listed